“Food grade silicone” and “flame retardant foam” can be useful starting descriptions, but neither phrase is an adequate approval record. For food processing equipment, electronics enclosures or transport components, the documented grade and exact application matter.
Begin with the use case
Will the gasket contact food directly, or is it fitted elsewhere on the machine? What temperatures, cleaning chemicals and mechanical pressures will it see? Is the concern food contact, flame performance, electrical properties or several requirements at once? A test against one standard does not establish suitability for every location on a plant.
Check the specific grade and test
Saint-Gobain’s Norseal brochure reports FDA extractables testing under 21 CFR 177.2600 for certain foam grades, including F-12, F-15 and F-20. It also lists various grade-specific UL and other industry specifications. Those entries are not a blanket certification for all Norseal silicone products or an automatic approval for an assembled food-contact component. Request the current documentation for the exact grade and thickness being considered.
The brochure also cautions that laboratory flammability results may not predict behaviour in actual fire conditions. Where an approval is critical, ask what standard, test method, configuration and supporting certificate apply to the finished part.
Leave an audit trail
Record the approved grade, supplier, drawing or dimensions, intended contact and service conditions, relevant current documents and who signed off the choice. Ask about a substitute only after checking those same requirements. Brown International can help source grade information and discuss options; the user must confirm suitability and compliance for the intended application.